1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Capturing Moving Targets without Blur

Discussion in 'Photography' started by Gertn, May 18, 2016.

  1. Gertn

    Gertn Active Member

    Messages:
    887
    Likes Received:
    235
    Trophy Points:
    43
    One of the hardest jobs for a photographer is shooting moving targets. Not only is it hard to catch them in the frame, it’s also hard to keep the image from blurring. But, thankfully there are a few tricks of the trade that you can learn.

    Use Autofocus

    If you have a digital camera you can use the AF-C mode, which is continuous autofocus. This will enable your camera to focus on the moving object whether it’s far or near, and very quickly - thus giving you an opportunity to capture the image in the frame without worrying about the issue of blur.

    Try Dynamic Mode

    Most digital cameras today have another autofocus mode called Dynamic mode. This mode will also help control the image captured even if you’re moving in addition to the subject moving. If you’re tracking a bird or a motorcycle, and you’re in a car or other moving machine, then you can focus on getting your frame right while the camera does the work to eliminate blur.

    Take the Photo from a Distance

    It’s much easier to focus on a moving object if you’re not up close to it, for a variety of reasons. One is that you can get the image you want in the frame easier, though you may miss some detail, and secondly it won’t be likely to blur since the camera isn’t being forced to focus differently for what’s close and what’s far.

    Shutter and Aperture

    These are terms that to learn in order to take good photographs. Aperture is the opening of the lens, and is literally the camera hole and how big you open it. On your camera it’s listed as f/1.4, f/2, f/2.8 and so forth. The larger the hole, the more light gets in. The shutter speed you choose depends on a lot of math, including the distance you are from the subject, the direction of the motion, and other factors. But, in reality you just have to practice to get this right. Try different speeds on different shots to see what happens.

    White Balance

    You’ll need to experiment with the white balance on your particular camera. Learn how to set WB manually to ensure that it’s accurate and works best. The reason this is important is that if the WB is not set right (and it might be right on Auto), then the focus of the picture in your frame might not look as sharp as it should.

    Avoid Flash

    You may need to set your camera to manual mode to avoid any type of flash with motion pictures. Flash slows down things, so you want to avoid that if at all possible. This brings us back to why learning aperture is so important, because you want to avoid using flash and let in the right amount of light in other ways.

    If you want to take professional moving images without blur, it will take some practice. As you practice and look at the results, take notes so that you can know what worked and what did not work. The more you practice, the better it’ll get.
     
  2. Oluomoadebayo

    Oluomoadebayo Moderator Staff Member

    Messages:
    1,029
    Likes Received:
    337
    Trophy Points:
    83
    I have a professional camera but setting the aperture seems a daunting task. Will you please explain how best to set the aperture for perfect shot?
     
  3. jenjut

    jenjut Active Member

    Messages:
    356
    Likes Received:
    123
    Trophy Points:
    43
    Use auto mode for function on the camera.
     

Share This Page